Проект Situational Awareness -> Situational Awareness Library

help

Handvalve

The handvalve object is used when there is a valve in the field that the board operator has no control over, but has feedback only.

Property	Description
Name	Hand Valve
Graphical Representation
Example Equipment Template	Valve
Associated Composite Genie	Valve.xml
Equipment.Items the Genie expects	Open, POS, Closed, Opening, ClosingCtrlMode, CtrlModeDefRunStatusOP OPTrackFBOOS, OOSDisableOpenCmd CloseCmd StopCmd AutoCmd ManCmd Stopped
Equipment Parameters the Equipment Items Expect	InternalIODeviceCicodeIODeviceEqStatusFuncCtrlModeRange
Associated Faceplate(s)	Simple ON / OFF ValveComplex ON / OFF Valve
Equipment.Items that the Faceplate expects	OPTrackCtrlModeDefOpenCmd CloseCmd StopCmd AutoCmd ManCmd Stopped

Configuration Tasks

• Create equipment and organize equipment in a hierarchy: Create equipment instances for the required objects, and organize the equipment in a hierarchy. Objects can be referred to by their name when you add Composite Genies to a graphics page. You can add one or more instances of an equipment to a page.
• Associate PLC Alarm Limits for Meters: This is an optional task that is required if you want to use PLC alarm limits instead of the standard analog alarm limits.
• Insert a Composite Genie: Create graphics pages with instances of Composite Genies that are associated with the equipment you have defined in your project.
• Create a new faceplate: Add a faceplate for the equipment to allow operators to engage with the equipment at runtime.
• Write Cicode functions to initialize PR and OR values. Refer to the Cicode Reference Online help for more information. It is recommended that for a Dual Level meter you set these values on both meters to the same value.

Note: Check that the address configured for a valve in the PLC is the same as the tag address specified in Plant SCADA. If this is not configured correctly, the state and output value of the valve will not be accurate.

Presentation Options

The following presentation options are available for this object.

Option	Description
Equipment Name	Enter a name for the piece of equipment. You can enter a maximum of 160 characters for this option.
Equipment Item Prefix	Specify the prefix and the equipment.item the prefix will be applied to.
Valve Type	Select the type of Valve - Block, Control or Damper, Hand.
Size	Size of the Valve - small or large.
Orientation	Select the orientation that is appropriate for the presentation of the object on the graphics page. Horizontal or Vertical. Horizontal is selected by default.
Fail Type	Select the fail action for the valve (open, closed, or last).
Display Label	Use this setting to display a label at the selected position. Select None if you do not want to display a label.
Label	Enter the text that will display at the location specified in Display Label field. You can enter a maximum of 30 characters for this option.
Display Alarm Indicator	Select this option to display an alarm indicator which indicates the highest priority alarm and its state for this Valve’s equipment.
Display Alarm Flag	Use this setting to display an alarm flag at the selected position. Note: If you select the same position for the alarm flag and Display Status indicator (see below), they will overlap. The alarm flag will not be visible.
Display Status Indicator	Select the location to display a status indicator. Select None if you do not wish to see the status indicator. For more information, see Status Indicators.
Display Output Bar	Select this option to display a field control or computer control for this object.
Display OOS	Select this option to display an out of service indicator.
Display Control Mode	Select this option to display a mode indicator for the object.
Display Readback	The Display Readback represents the actual output for the controller.
Display Value	Select this option to display the output value.